3SX Wiring Harness Connector Plugs
3-Pin Rectangle Female
This is a wiring harness connector plug kit that is a used on the 3000GT/Stealth/GTO, as well as many other Mitsubishi vehicles. This particular connector comes as a female plug that typically attaches directly to a particular part, rather than a pigtail harness end.
Note the guide pin locations of this connector! There is 1 in the middle of one side and 2 at the outer edges of the other side.
NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.
Known Applications
Following is a list of known applications for this harness plug connector.
Table Note: H = Harness side of connection | P = Part side of Connection
Application / Location | MALE | FEMALE |
Electronic Speedometer Sender (all AWD, all FWD AT, 94+ FWD MT) | -- | H |
PTU / Ignition Module on SOHC | -- | H |
PTU / Ignition Module on DOHC - Left Plug | -- | H |
MAP Sensor on 96+ Intake Plenum | -- | H |
Electronic Speedometer Sender (all AWD, all FWD AT, 94+ FWD MT)
PTU / Ignition Module on SOHC
PTU / Ignition Module on DOHC - Left Plug
MAP Sensor on 96+ Intake Plenum
This is similar to Standard Motor Products # S745 / S-745
NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wiring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.
NOTE2: There are NO RETURNS on these plugs once they have been assembled, partially assembled, terminals crimped to wire, or altered in any way from being NEW.
Harness Plug Crimping Tool
We also offer a Molex style wire crimping tool that works well with these harness plugs. Order this in addition to your harness plugs for your complete wiring solution.