Mishimoto Aluminum Radiator 3000GT Stealth (Manual Trans Only)

Mishimoto Aluminum Radiator
3000GT / Stealth
(will NOT work with Automatic transmission)

This is the Mishimoto custom all-aluminum 2-row stock-replacement radiator. This is a drop-in replacement, accepting the stock radiator fans, ports for the stock temp sensors (if so equipped), and accepts the stock radiator hoses or any of your choice of aftermarket ones that we also offer separately! The core measures about 1.5-inches thick.

Will NOT work on vehicles with the automatic transmission as this radiator does not accommodate the transmission oil cooler.

NOTE: Take EXTREME caution when installing this (or any) radiator in a 3000GT/Stealth as the bolt/nut/stud on the driver's side of the AC condenser (in front of the radiator) does stick out and can damage the core when you are installing the radiator. We recommend not attaching the fans to the radiator until AFTER you have dropped the radiator in place. The stock fans are slotted on the bottom mount points so you can start the lower fan mount screws, then drop the radiator in place, then slide the fans in and tighten the screws. It is recommended that you cut off the outer part of these studs (particularly Gen2) to allow improved clearance with any oversized radiator (3SX or other brands). We also recommend that you slide a sheet of cardboard down in FIRST to be against the AC condenser and cover the bolts before sliding the radiator in place - that will provide a layer of protection against damaging the radiator during installation.
See the pics below for details - click small pics for larger pics.

Gen1 1991-1993 3000GT/Stealth	Gen1 1991-1993 3000GT/Stealth
Gen2 1994-1999 3000GT/Stealth	Gen2 1994-1999 3000GT/Stealth

3SX will not be responsible for damage due to mis-installation.