3SX Adjustable Rear Control Arms - VR4/TT

The ORIGINAL! Developed by 3SX years ago, our custom adjustable upper rear control arms (camber arms) for the AWD 3000GT/Stealth set the standard. These control arms alleviate the notorious problem these cars have with rear camber alignment after installing lowering springs or a coilover system. These control arms are a direct replacement for the stock upper rear arm - just remove the bolts, remove the arm, and install the 3SX adjustable control arm in its place. Don't settle for 1.5 or even 1.0 degrees negative camber - that wears out tires way faster than normal. These new adjustable arms will get your car's rear camber into perfect spec!!

Are you a hardcore racer? These give you ultimate versatility! Autocross and road course setup is easy where you can actually set a desired negative camber on the rear for better handling. Drag racer? Set POSITIVE camber so when the rear end squats during launch you get optimal tire patch and traction!

NOTE: These are NOT shipped with the endlinks pre-greased, you will need to grease them during installation.

If you need new concentric bolts/nuts replacement mounting hardware is listed here.