HID Headlight Conversion Packages

8000k (Blue)

6000k (White)

HOT! HOT! HOT! These are new HID conversion kits that are EASY fits in the 3000GT! For 94-99 3000GT/Stealths pull out your stock low-beam bulbs (the outer ones) and plug these in. The kits just plug into your factory harnesses in almost no time. The ballasts actually fit down in the corner a bit behind the corner lights. For 91-93 cars, we have the H4 style bulbs so if you are running the H4 conversion housings, you can use these (will not work with stock 91-93 bulbs). If you need the H4 conversion housings, we offer those here.

We also carry the H3 style for the foglights, so if you want to run matching foglights, you can!

3000GT/Stealth applications:
1991-1993: (ONLY with H4 Headlight Conversion Housings) - H4
1994-1999: LOW Beam - 9006
1994-1999: High Beam - 9005
1991-1999: Fog Lights - H3

We carry a variety of styles for other cars as well - consult your owners manual to confirm application.

3SX EXCLUSIVE!!!
We offer BOTH the 6000k temp and 8000k temp bulbs with your kit! The 6000k are the pure white ones, while the 8000k have more of a blue tint to them. But you have the choice with us because we give you BOTH sets of bulbs! No one else offers that deal! Or you can opt to get just the base kit with the 6000k bulbs. We do not offer the base kit with the 8000k bulbs.

PAY ATTENTION TO THE STYLE BULB YOU ARE ORDERING!!!
SELECT FROM THE DROPDOWN MENU.

---

Installation TIP for H4 HID Kits

When you are using the H4 HID kits sold through 3SX, you actually do NOT need the H4 adapter harness since the wiring on the HID bulbs are bare pigtails that can plug directly into the stock bulb harness:

Stock Red+Blue wire __ goes to Double Black on H4 HID Bulb
Stock Red wire / goes to Single Black on H4 HID Bulb
Stock Red+White wire \ goes to Red on H4 HID Bulb

_/ \ is the shape of the stock harness looking at where the bulb/wires plug in.

We have an Installation Guide in the Tech/FAQ section specifically for the H4 HID's

---

IMPORTANT NOTES ABOUT HID KITS

HID bulbs are very delicate fragile components, as are the ballasts which are essentially hig-voltage converters.

1 - Do NOT touch the HID bulb except the base and wire portions, i.e., no touching the glass bulb, shafts, halogen bulbs, etc. If you do accidentally touch it, use a cotton cloth/towel with alcohol to carefully remove any oils left on the bulb. The oils from your hands touching the glass portion of the bulb will cause the lens to burn and destroy the bulb.

2 - Do not flash the high beams (in the case of H4) unless absolutely necessary. And this applies to whether your high/lo beams are on simultaneously or alternately.

3 - Do not turn the engine ON or OFF with the HID lights on.

4 - Do not allow the HID ballasts to be exposed to excessive water/moisture even though they are water-proof to a certain degree.

5 - Do not leave your HIDs on when car is idle for extended lengths of time. The act of driving the car helps cool the bulbs and the lack of airflow can overheat and destroy the bulb.

6 - Do not turn the lights on and off repetitively. This can damage any bulb - incandescent, halogen, HID, LED, etc.

 

PAY ATTENTION TO THE STYLE BULB (NUMBER) YOU ARE ORDERING!!!
SELECT FROM THE DROPDOWN MENU.