3SX Custom Turbos - The 3SXecutioners V2
The 3SXecutioners feature the stock compressor housing with a custom 2-inch inlet snout, bored out to accommodate the larger compressor wheel. They feature the larger TD04HL cartridge and hot side. These turbos are made with ALL NEW INTERNALS - new cartridges/wheels/bearings/shafts. Depending on stock, new or refreshed housings may be used - currently they are NEW housings and wastegates!
These turbos CAN be used with the stock inlet pipes (pre-turbo pipes) by simply removing the rubber spacers where they go on the turbos and clamping them directly to the turbos. heck you can probably sell those little "gaskets" to someone needing the since they were never available separately! Alternately, we offer the 3SX Pre-Turbo Intake Pipes that will easily accommodate the larger turbo inlets.
NOTE: New oil lines MUST be installed at the same time or they will NOT be covered under warranty should something go wrong with them. So... If you get these turbos and the 3SX Turbo Oil Line Kit at the same time, we'll discount the price of the oil line kit! Don't forget to thoroughly clean the oil cooler lines and element as well!!
The oil and coolant ports match the stock threads: Oil inlet is M10x1.25. Coolant inlet and outlet are M12x1.25.
These turbos have a $150 core charge added to your cart, which is refunded when we receive your old stock turbos back.
3SX Core Return Form.
Review This Product!
Add to wish list
Select desired item from drop-down Options Menu