3SX Adjustable Rear Control Arms BUNDLE
Includes Control Arms + Heim Cover Boots + Hardware Bolts/Nuts
3000GT/Stealth AWD TT/VR4 Upper Camber
3000GT/Stealth FWD NA Lower Camber and/or Toe
This is BUNDLE to save you a little cash. We recommend the control arms for pretty well any 3000GT and Stealth running lowering springs or coilovers. We also recommend the rubber heim joint boot covers to help protect the ends from dirt and debris. And many times the mounting bolts/nuts have seen better days and need replacing... So we have bundled all that together for teh various control arms so you can save a little cash!
Rear Adjustable Control Arms - AWD and FWD
The ORIGINAL! Developed by 3SX years ago, our custom adjustable upper rear control arms (camber arms) for the AWD 3000GT/Stealth set the standard. These control arms alleviate the notorious problem these cars have with rear camber alignment after installing lowering springs or a coilover system. These control arms are a direct replacement for the stock upper rear arm - just remove the bolts, remove the arm, and install the 3SX adjustable control arm in its place. Don't settle for 1.5 or even 1.0 degrees negative camber - that wears out tires way faster than normal. These new adjustable arms will get your car's rear camber into perfect spec!!
Are you a hardcore racer? These give you ultimate versatility! Autocross and road course setup is easy where you can actually set a desired negative camber on the rear for better handling. Drag racer? Set POSITIVE camber so when the rear end squats during launch you get optimal tire patch and traction!
Our 3SX Adjustable Control Arms use high quality heavy duty rod ends designed for a long life on these heavy cars.
NOTE: These are NOT shipped with the endlinks pre-greased, you will need to grease them during installation.
AWD: These are the rear UPPER arms on the AWD 3S.
FWD: These are the LOWER arms. The long arms are camber. The short arms are toe.
Sold as PAIRS.
Rear Control Arm Heim Joint Protector Boots
Protect your investment with the rubber boot covers which protect the heim joint ends of the rods. The bundle includes the boots for all heim ends (2 for TT, 2 for NA camber or toe, 4 for NA camber and toe).
Rear Control Arm Mounting Hardware
These SETS of the rear control arm mounting hardware for where the rear lateral control arms mount to the subframe. This hardware works with either the stock rear control arms and also the 3SX Adjustable Control Arms.
These bolts and other rear suspension hardware are all listed individually on the Rear Subframe Mounting Hardware listing. We set up these kits to save you a little money when ordering the hardware with your control arms. :-)
Sold as pictured for BOTH left and right control arms:
AWD/TT = 2 Bolts + 2 Lock Washers + 2 Nuts
FWD/NA Camber or Toe = 2 Eccentric Bolts + 2 Eccentric Plates + 2 Lock Washers + 2 Nuts
FWD/NA Camber+Toe Set = 4 Eccentric Bolts + 4 Eccentric Plates + 4 Lock Washers + 4 Nuts