Search
Filters
Close

3SX Custom Polyurethane Motor Mounts Undrilled to Move Engine DIY Mounts 3000GT Stealth

3SX Custom DIY Polyurethane Motor Mounts
Do-It-Yourself Pin Location to Relocate Engine
All DOHC 3000GT & Stealth

Welcome to the 3SX Unholy Motor Mounts! These are offered for the experienced builder that truly needs to customize their engine bay - specifically, if the whole engine itself needs to be re-positioned in the engine bay! This set of mounts is useful if you are installing a larger engine like the 6G74 or 6G75 conversion - you can reposition the engine to sit lower to allow for hood clearance, exhaust pipe clearance, strut bar clearance, etc. Or if you are running a large custom turbo setup and need to position the engine a little forward or backward for clearance. These mounts give you total control over just where your engine sits!

How's it work? The mounts come UNDRILLED - without the holes drilled for the center pins. Yes, the center pins ARE included - but be aware that the holes must be drilled correctly to match the pin for each mount. Simply install the mounts in the engine bay and the aluminum upper to the engine. Then use an engine hoist (recommended to have a leveler) to position the engine exactly where you want it. Mark the poly through the bracket holes to indicate where to drill each mount. Remove the mounts, drill the holes, and press in the pins.

NOTE: THIS IS A CUSTOM PART AND REQUIRES ADDITIONAL WORK.
Obviously, these are not drop-in replacement mounts. The mounts themselves require customizing for use. Additional customizing of other parts may be required depending on your installation. Examples include shimming/modifying the lower cross members for clearance of the engine, modifying the actual engine brackets for clearance, modifying piping, etc.

NOTE: THIS IS A CUSTOM PART AND REQUIRES ADDITIONAL WORK.
Obviously, these are not drop-in replacement mounts. The mounts themselves require customizing for use. Additional customizing of other parts may be required depending on your installation. Examples include shimming/modifying the lower cross members for clearance of the engine, modifying the actual engine brackets for clearance, modifying piping, etc.

 

Set includes 4 engine mounts without holes drilled and the 4 requisite center pins to be pressed in after locating and drilling the holes.

 

Picture of 3SX Custom Poly Motor Mounts Set - DIY Setup to Locate Engine
3SX Custom Poly Motor Mounts Set - DIY Setup to Locate Engine
SKU: Mount3SXPoly-SetDIY
$299.00
Product tags