Search
Filters
Close

3SX DOHC Regrind Cams Racing Camshafts 3000GT Stealth Twin Turbo and Non-Turbo

3SX Regrind Racing Camshafts

Cams are an easy way to pick up more power, and even stretch out the power band so you have more power across a broader RPM range. These are reground cams which include the spacer/shims to go under the lifters.

Street Grind: is a 264 cam offering easy driveability without a lopy idle yet adding some mid range and top end without the low-end sacrifice of more aggressive cams.

Super-Street Grind: is a 264+272 mixed set using the 264 cams on the intake and the 272 cams on the exhaust. This helps to further stretch the power band with minimal low end loss. What the 264in/272ex gives over a 264/264 cam setup is faster turbo spoolup AND more power top end. Best of both worlds.  It's all about more energy thru that 272 exhaust cam profile to spoolup turbo, but 264 intake gives great streetability.

Lift for all of these cam profiles is 398.

These are sold in sets of 4.

 Check out our Tech/FAQ for correctly identifying cams to make sure they are installed properly.

NOW OFFERING STOCK PROFILE:  If your cam lobes are damaged we can have your cams back to the stock profile.  These will require shims as well (we provide).

NOTE: All profiles require you to check retainer to guide seal clearance. Minimum is .030". Also check rocker arm to retainer clearance.

NOTE: 3SX recommends that aftermarket cams more aggressive than stock should only be used with supporting hardware modifications such as stronger valve springs and new lifters. Failure to properly support aggressive cam shafts can result in collapsed lifters, thrown rocker arms, and other damage to your heads and engine. 3SX is not responsible for damage to your motor from installation, mis-installation, use, or mis-use of custom cams and other head components.

NOTE: There is a core charge when ordering camshafts. The charge is included in the shopping cart. Send your stock camshafts back to 3SX after installing your new cams for a refund of the core charge. Your core cams can not be previously welded or re-ground, and journals must be smooth and undamaged - they must be in rebuildable condition. Please see the 3SX FAQ Page for complete core policies.

3SX Core Parts Return Form
Need a copy of the Core Return Form? Download and print it here!

 

Picture of 3SX Regrind Cams Set of 4 - Stock Profile
3SX Regrind Cams Set of 4 - Stock Profile
SKU: Cams3SXRegStock
$789.95
Picture of 3SX Regrind Cams Set of 4 - 264 Street Grind
3SX Regrind Cams Set of 4 - 264 Street Grind
SKU: Cams3SXReg264
$789.95
Picture of 3SX Regrind Cams Set of 4 - 264+272 Super-Street Grind
3SX Regrind Cams Set of 4 - 264+272 Super-Street Grind
SKU: Cams3SXReg264272
$889.95
Picture of 3SX Regrind Cams Set of 4 - 272 Race Grind
3SX Regrind Cams Set of 4 - 272 Race Grind
SKU: Cams3SXReg272
$989.95
Picture of 3SX Regrind Cams Set of 4 - 280 Track Grind
3SX Regrind Cams Set of 4 - 280 Track Grind
SKU: Cams3SXReg280
$989.95
Product tags