3SX Urethane Steering Rack Collar Bushings

 3SX Urethane Steering Rack and Pinion "Collar" Bushings

3SX Does it again! Brand New Urethane Steering Rack Bushings for BOTH SIDES of your steering rack! Designed IN-HOUSE at 3SX to ensure a perfect fitment on your 3000/Stealth! No more having to modify a bushing from another vehicle and hoping that it works, now you have a set of bushings that you know will work! Eliminate that sloppy feeling in your steering! Get rid of those strange noises when making a left or right turn! Firm up your steering without feeling all those vibrations through the steering wheel! If you are replacing your steering rack, why use the old, worn out OEM rubber that is no longer available? Get the set of the NEW 3SX Steering Rack Bushings and solve your problems!

SOLD AS A PAIR! YOU GET BOTH!!

The Main Bushing is designed in two pieces to fit tighter than the OEM rubber bushings do, we also eliminated the small little nub that was such a hassle to get lined up and HOPE that it went into place! No need for the nub for alignment anymore due to the perfect fit of the 3SX designed bushing!

Here you can see how one half of the 3SX Main Bushing wraps around the locating pin on the steering rack and the radius that perfectly matches the steering rack bushing clamp! Just a little bit of wiggling and the clamp slips right in place and STAYS THERE making installation so much easier!

Can you say tight fit? Once you have these on your rack, they are not going to slip around like the old OEM rubber ones did!

The secondary bushing fits both the FWD "Single Line" steering rack, as shown above, and fits the AWD "Dual Line" steering racks, picture below!

SOLD AS A PAIR! YOU GET BOTH!