Search
Filters
Close

Alignment Dowel Pins - Various 3000GT/Stealth

Alignment Dowel Pins - Various

There are a variety of alignment dowels/pins used throughout the engine during assembly to ensure different components are properly positioned.

These are various ones, all sold individually.

 


Alignment Dowel Pin Cam Gear to Cam Shaft

These are the little steel alignment dowel pins that go into the ends of the camshafts to align the cam gears.  They are the same on all DOHC cams.

Priced and sold individually.


Head & Cam Alignment Dowel Pins 3S

When building your motor you may need new head alignment dowel pins or cam journal dowel pins. These are factory new ones. Between the heads and block there are a total of 4 in the motor (both DOHC and SOHC). For the outer cam journals, there are a total of 16 between both heads.

Head Alignment Dowel Pins (DOHC + SOHC) (4 total, priced each)
Cam Journal Alignment Dowel Pins (DOHC) (16 total, priced each)


Clutch & Flywheel Bolts & Pins - 3000GT/Stealth

These are the alignment pins for mounting the clutch and flywheel assembly.  On the AWD TT/VR4 there is a single alignment dowel that goes into the end of the crankshaft to align the flywheel when it mounts to the crank.  The FWD flywheel (stock or aftermarket) does not have this hole drilled so it is not used on the FWD application.

All of the flywheels (stock and aftermarket) use 3 alignment dowels that align the clutch cover/pressure plate.

MANUAL Transmission:
* the alignment dowels that are in the flywheel to line up the pressure plate (3 on car, not pictured)
* the alignment dowel in the crank for flywheel alignment (1 on car, only on TT/VR4 flywheels)

 


Transmission to Block Alignment Dowels

We also offer the hollow alignment dowels that go into the block (at the "W"points in the image) to align the transmission when mounting it to the engine. These can sometimes get lost or damaged.
There are 2 on the engine, sold individually.

 


Oil Pump Alignment Dowel Pins 3S

When building your motor you may need new alignment dowel pins for your oil pump. These are factory new ones. There are 2 that go in the block to align the oil pump.

Same for 91-99 all models. Sold individually.


Alignment Dowel Pin
Rear Main Seal Case to Block

When building your motor you may need new alignment dowel pins for the rear main seal case assembly. These are factory new ones. There are 2 that go in the block to align the rear case.

Same for 91-99 all models. Sold individually.

 


Alignment Dowel Pin
Driver's Side Half-Shaft to Block
All 3000GT/Stealth

The driver's side halfshaft is a 2-piece shaft with a hanger bracket that holds the bearing.  Where that bracket mounts to the block, there are 2 steel alignment dowel pins that make sure it is located properly when bolting the bracket to the block. These are factory new ones.

Same for 91-99 all models. Sold individually.

 

Picture of Alignment Dowel Pin - Cam Gear to Cam Shaft
Alignment Dowel Pin - Cam Gear to Cam Shaft
SKU: AlignDowelCamGear
$19.95
Picture of Alignment Dowel Pin - Head to Block - All 3S
Alignment Dowel Pin - Head to Block - All 3S
SKU: AlignDowelHead
$16.95
Picture of Alignment Dowel Pin - Cam Journal - DOHC
Alignment Dowel Pin - Cam Journal - DOHC
SKU: AlignDowelCamDOHC
$2.50
Picture of Alignment Dowel Pin - Tranny to Block - All 3S
Alignment Dowel Pin - Tranny to Block - All 3S
SKU: AlignDowelTranny
$9.95
Picture of Alignment Dowel Pin - Oil Pump to Block - All 3S
Alignment Dowel Pin - Oil Pump to Block - All 3S
SKU: AlignDowelOilPump
$9.95
Picture of Alignment Dowel Pin - Rear Main Seal Case to Block (each)
Alignment Dowel Pin - Rear Main Seal Case to Block (each)
SKU: AlignDowelRearMain
$6.95
Picture of Alignment Dowel Pin - Driver Halfshaft Hanger Bracket to Block
Alignment Dowel Pin - Driver Halfshaft Hanger Bracket to Block
SKU: AlignDowelHSBracket
$6.95
Product tags