KBS Diamond Clear - Multi-Use Clear Coat

• Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
• Permanent high solids (over 60%) and low VOC's Clear Coat.
• Ideal for Direct To Metal (DTM) applications - No Additives Needed!
• Apply directly to Painted Surfaces with Minimal Surface Prep.
• Incredibly tough and hard like no other clear coat on the market.
• Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
• Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
• Unlike normal two part coatings, no hardener is needed. You can just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
• Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.
• Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
• Graffiti Resistant: because of its chemical resistance, grafitti just won't stick and can be removed simply with a solvent soaked rag.
• Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.

DiamondFinish Clear - Features

Need A Long Term Storage Solution for DiamondFinish Clear?

• Over 60% Solids
• Direct To Metal Application - No Additives Needed
• Apply directly to Painted Surfaces
• Single Part Formula
• Tougher and Harder than 2 Part ClearCoats
• Seals both Paints & Metals
• Self Leveling (No brush Marks)
• Simple Brush or Spray Application
• High Temperature resistance (300F) suitable for Motors and Brake Callipers
• Permanent UV Stability
• High Chemical Resistance (including fuels)
• Graffiti Proof
• Recoat in 1-2 hours
• Seals Ferrous and Non Ferrous metals
• Breakthrough High Solids Coating Technology

DiamondFinish Clear - Applications

• Protecting steel and plastic bumpers paint work.
• Automotive aluminium fitting, fuel tanks and parts.
• Protecting existing paint work from physical damage.
• Stopping chemical attack from acids and alkalis on existing paint work.
• Protecting paint work from all fuels.
• Sealing motorcycle fuel tanks paint work.
• Graffiti Protection.
• Custom Automotive Refinish.
• Marine internal and external Refinish.

DiamondFinish Clear - Coverage

Theoretical coverage at one mil (25 µm) is 400 sq.ft. per gallon/9.8 m² per liter. Recommended thickness of at least two mils (50 µm) would require at least two full coats. At least three coats recommended for marine applications. Material losses during mixing and application will vary and must be taken into consideration. Please expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.

• 4oz of DiamondFinish Clear should cover 12.5 sq. ft. single coat coverage.
• Pint of DiamondFinish Clear should cover 50 sq. ft. single coat coverage.
• Quart of DiamondFinish Clear should cover 100 sq. ft. single coat coverage.
• Gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.
• 5 Gallon Pail of DiamondFinish Clear should cover 2000 sq. ft. single coat coverage.