Speed-Bleeder Bleeder Valves
These valves are a must for the DIY-er or anyone else who works with brakes. These have a built-in spring-loaded ball-bearing check-valve so you can bleed your brakes without having to have a second person around to pump the brake pedal - you loosen the valve, then pump the brakes yourself and the check-valve prevents air from back-washing into the system.
NOTE: We have been receiving mixed feedback on the sizes used for the 3000GT and Stealth, not consistent with SpeedBleeders listed applications. Therefore, the options have changed. The sizes used are either 10mm (most AWD models) or 7mm (most FWD models, some AWD).
Please verify the sizes you need prior to ordering. You can easily determine the size by checking what size wrench they need. The stock 7mm brake bleeder valves (stock and SpeedBleeders) use an 8mm wrench, and the stock 10mm valves use a 10mm wrench. So check your stock bleeder valves and order these to match your stock ones. NOTE: the 10mm SpeedBleeders may use either a 10mm OR 11mm wrench.
NOTE: Sizes on 3000GT/Stealth AWD: According to Mitsubishi, the AWD rear is a 10mm valve if your build date is April 90 - Feb 92, then Mar 92 - May 93 uses a 7mm valve, then June 93+ (i.e., 94 model and later) are back to the 10mm valve. For the AWD front caliper, they use the 10mm for all years. We still recommend you check your valve sizes prior to ordering. NOTE: Sizes on 3000GT/Stealth FWD: According to Mitsubishi, the FWD front AND rear calipers use a 10mm valve April 90 - Feb 92, then the 7mm valve March 92 and later. We still recommend you check your valve sizes prior to ordering.NOTE: Sizes on Starion/Conquest - The StarQuests use 10mm for both front and rear calipers.