Stainless-Steel Braided Brake Lines- Evo Conversion

Stainless-Steel Braided Brake Lines 3S TT -

Evo 8/9/X Conversion

Dramatically increase your braking response with steel braided brake lines! These offer better braking with your existing setup because there is no pressure loss in the lines due to stock rubber brake lines expanding and not delivering all of the brake fluid pressure to the calipers. Our brake lines are DOT approved and all braided stainless-steel lines, available in Black, Blue, Clear, and Red. These come with silicone covers for protection of colors, and have steel end-fittings. Sold in complete sets of 8 hoses + 4 banjo bolts + 8 washers. These are designed to convert the 3S brake line setup to use Evo 8/9 Brembo brakes.

Blue and Yellow are not shown, limited quanities, colors are discontinued!

3000GT / Stealth 1991 - 1999 Twin Turbo AWD

We also recommend getting the solid brake line connectors that go between the soft lines.

NOTE: Brake lines are platform based, so if you have done a turbo conversion (engine) to your non-turbo you still need the NA FWD lines. Likewise, if you do the VR4 Big Brake conversion to your FWD you still need the NA FWD lines.

Notice:The hose kit was not intented for the bracket to be in use but will still bolt up the same 

Installation TIP for 3000GT/Stealth
When installing brake lines, use these general guidelines to get them right the first time:
* Short lines with banjo/female ends go into the calipers.
* AWD: Long lines are all female/female and go well to strut (front) and connector on trailing arm (rear).