Stereo Harness Adapter for Radio 3000GT/Stealth

Radio Wiring Adapter Harness Plugs 3000GT/Stealth

2-Plug Harness - Typically for "1st Gen" 3000GT/Stealth

1-Plug Harness - Typical for "2nd Gen" 3000GT/Stealth

A very common upgrade for the 3000GT/Stealth is to swap out the factory radio for an aftermarket one -especially with today's selection MP3-capable, multi-disc, color-screen, video enhanced, and navigation units! This problem is trying to figure out what wire does what, and not wanting to hack up your stock harness...

These are direct-fit harnesses that allow you to simply unplug your stock head unit and plug in the adapter harness which gives you pigtail wiring to hook up to your aftermarket stereo system without cutting into your stock harness.

There are 2 versions available, so check to confirm which you have prior to ordering. Some samples are provided below to give you an idea, but they are not representative of ALL of the factory stereo options that were offered.

NOTE: These are to plug an aftermarket stereo into the factory wiring harness.  They are NOT for using/adapting the factory radio.  The harness have MALE plugs which plug into the wiring harness once the factory radio is removed, allowing you to adapt your aftermarket radio to the stock wiring.

Sample 2-Plug Harness Stock Stereo Systems
(Compare pictures left/right for front/back views of radios)

Sample 1-Plug Harness Stock Stereo Systems

(Compare pictures above/below for front/back views of radios)

NOTE: Confirm which you have in your car and order accordingly. :-)