SuperPro Bushings Kit 3000GT Stealth Front Lower Control Arms Big REAR Bushing and Bracket Bushing

SuperPro Bushings Kits for 3000GT & Stealth
Front Control Arm
Rearward Mount Point BIG Bushing

CENTERED BOLT HOLE

These are replacement bushings for the front lower A-arm control arm, the BIG bushing at the rearward mounting point where it bolts to the chassis. One kit replaces BOTH sides on the vehicle - i.e., both control arms.

OFFSET BOLT HOLE

THIS ONE

BRACKET TO CHASSIS

These are replacement bushings for the front lower A-arm control arm, the bushing in the BRACKET at the rearward mounting point where it actually bolts to the chassis. One kit replaces BOTH sides on the vehicle - i.e., both control arms.

Control Arms Through The Years

DOHC TT & NA 1991-1992early (Build Apr 90 - Oct 91)
DOHC TT & NA 1992mid-1994early (Build Nov 91 - Sept 93)
DOHC TT & NA 1994mid-1999 (Build Oct 93+)
SOHC NA 3000GT 97+ (Build May 96+)

Mitsubishi changed how the control arms were made, specifically with regards to the BIG rear main bushing. The 1991-1994early arms were all a round bushing with a steel sleeve (at left above). The 1994mid-1999 ones have that bushing on the arm and a separate bracket that clamped to the subframe to hold the bushing - that bushing had a bit of a triangular shape to it (at right in the above image).

NOTE: For this reason these SuperPro BIG Bushing replacements will NOT fit the 94mid-99 models with the big triangular bushing. The round bushing is not the same shape as the triangular rubber ones originally used.

NOTE: You MUST pay attention to the build date when ordering these parts.
Some change within the same model year.