Wiring Connectors Harness Plugs 3SX - 2-pin Oval

3SX Wiring Harness Connector Plugs
2-Pin Oval Male & Female

This is a wiring harness connector plug kit that is a used on the 3000GT/Stealth/GTO, as well as many other Mitsubishi vehicles. This particular connector is used in several locations on the vehicle, and comes in both male and female plugs that mate together. We offer them separately and as bundled pairs in several quantities.

2-Pin Oval MALE Plug

2-Pin Oval FEMALE Plug

NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.

Known Applications

Following is a list of known applications for this harness plug connector.
Table Note: H = Harness side of connection | P = Part side of Connection

EGR Sensor

ABS / Wheel Speed Sensors - 4 per car with ABS

Fuel Pump Resistor MD147796 - AWD TT/VR4 only

Fan Resistor on Passenger Side Fan Motor

Driver Side Fans Black Plug is Direct Fit
Grey Plug works OLY IF change BOTH Male & Female Plugs

Foglights 1991-1993 - Left & Right (2 total)

Front Windshield Washer Level Sensor

Underhood Switch for Alarm by Pass Headlight / Main Fuse Box

Reverse Light Switch on Transmission

NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wiring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.

NOTE2: There are NO RETURNS on these plugs once they have been assembled, partially assembled, terminals crimped to wire, or altered in any way from being NEW.

Harness Plug Crimping Tool

We also offer a Molex style wire crimping tool that works well with these harness plugs. Order this in addition to your harness plugs for your complete wiring solution.