3SX Wiring Harness Connector Plugs
4-Pin Oval 2x2 Male & Female
This is a wiring harness connector plug kit that is a used on the 3000GT/Stealth/GTO, as well as many other Mitsubishi vehicles. This particular connector is used in several locations on the vehicle, and comes in both male and female plugs that mate together. We offer them separately and as bundled pairs in several quantities.
4-Pin Oval 2x2 MALE Plug
4-Pin Oval 2x2 FEMALE Plug
NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.
Known Applications
Following is a list of known applications for this harness plug connector.
Table Note: H = Harness side of connection | P = Part side of Connection
Application / Location | MALE | FEMALE |
Cruise Control Vacuum Controller | P | H |
AC Fuse Box on Driver Side (the 4-pin plug, other is 10-pin plug) | P | H |
Coil Pak DOHC Engines | P | H |
O2 Sensor (x1 / x2 / x4 depending on year/model) | P | H |
Fuel Injectors Rear Bank Mini-Harness DOHC FWD NA Non-Turbo | P | H |
Cruise Control Vacuum Controller (driver side under Pulley Box)
AC Fuse Box on Driver Side (the 4-pin plug, other is 10-pin plug)
Ignition Coil Pak on DOHC Engines
O2 Sensor - All - (x1 / x2 / x4 depending on year/model)
Fuel Injectors Rear Bank Mini-Harness
NOTE: These plugs are unassembled as pictured at top and wire is not provided.
You will need a wiring crimping tool to assemble. Make sure any rubber boot seals are on the wiring BEFORE crimping on the metal terminal. Once the terminal is crimped onto the wire, it is inserted into the plug housing and the boot seal pushed into the back of the plug housing. The plastic guides/inserts for the front of the housing are clipped into place last.
NOTE2: There are NO RETURNS on these plugs once they have been assembled, partially assembled, terminals crimped to wire, or altered in any way from being NEW.
Harness Plug Crimping Tool
We also offer a Molex style wire crimping tool that works well with these harness plugs. Order this in addition to your harness plugs for your complete wiring solution.